HID ProxPro with Keypad

The Prox Pro proximity card readers weatherproof design and architecturally attractive enclosure allows easy mounting indoors or out. The Prox Pro Reader is ideal for applications requiring a larger read range.

• Ideal for medium-range applications.
• Available with Wiegand, Serial (RS-232/RS-422) or Clock-and-Data interface.
• Sealed for indoor or outdoor use.
• Optional glass mount kit available for mounting the reader behind glass.
• Available in grey or beige.
• Keypad data and card data can be sent on the same cable, or on a separate cable using 2 of 7 or 3 x 4 matrix.

Key Features

• Affords high reliability, consistent read range characteristics, and low power consumption in a single, easy-to-install package.
• Features multicolour LED, internal or host control of the LED, and/or beeper and a beeper off switch for silent operation.
• Provides Wiegand protocol interface compatibility with all standard access control systems.
• Offers an optional, fully integrated personal identification number keypad for heightened security. Can be mounted to glass (using the optional glass mounting kit).

Typical maximum* read range
ProxCard II Card up to 8 (20 cm)
ISOProx II Card up to 7 (17.5 cm)
DuoProx II Card up to 7 (17.5 cm)
Smart ISOProx II Card up to 7 (17.5 cm)
Smart DuoProx II Card up to 7 (17.5 cm)
HID Proximity & MIFARE card up to 7 (17.5 cm)
ProxCard Plus Card up to 3 (7.5 cm)
ProxKey II Keyfob up to 3 (7.5 cm)
MicroProx Tag up to 4 (10.2 cm)
ProxPass Active Vehicle Tag N/A

*Depending on local installation conditions.

Dimensions
12.7 x 12.7 x 2.54 cm

Power Supply
10-28.5 VDC; Linear power supplies recommended. Reverse voltage protection included.

Current Requirements
Average: 100 mA (12 VDC)
Peak: 120 mA (24 VDC)

Operating Temperature
-30 to 65 C

Operating Humidity
0-95% relative humidity non-condensing

Weight
336 gm

Cable Distance
Wiegand or Clock and Data interface: 152 m
RS-232 interface: 15 m
RS-422 interface: 1219 m
Recommended cable is ALPHA 1295 (22 AWG) 5 conductor stranded with overall shield or equivalent.
Additional conductors may be required for LED or beeper control. RS-422 requires ALPHA 6212C 2-Twisted Pair, shielded cable with drain wire, or equivalent for data, plus ALPHA 1292C two-conductor shielded or equivalent for DC power.